The light is built in on all GBA SPs.

there is a model with a better backlit display instead of a front lit display, but both have a light.

I am pretty sure, as the actual screen can be separated from the plastic cover (the thing that says game boy advance). I’ve never seen fungus in a screen though. That’s interesting.

That is not the inverter board. That is the LCD controller, to run each of the pixels on the lcd.

This guide also works great as a thermal paste replacement guide for the Wii, just remove the old thermal pads and clean off the heatsink, CPU, GPU, and WiFi board, and apply Thermal Grease to the CPU, GPU, And WiFi board.

Mine (RVL-CPU-01) Is probably The first revision, and mine had another EMI Shield Under the fan shroud. I’m Guessing that they removed it in later revisions. It just fits under the shroud normally. For Pics, here is a link. Images are there soon.

https://sites.google.com/site/ninteardow...

Written by ifixit = repairability score

not Made By ifixit = no repairility score

Why is the difficulty moderate

Large version doesnt work :/

When I was putting mine back together, the flap popped off and when I tried to put it on with a tweezers, it snapped. Any suggestions other than scrap it or use it without the touchscreen? Pictures at https://sites.google.com/site/memesbyluc...

The top middle chip (below the dock connector is 256 megs of sdram