跳转到主内容

目录

学生贡献的维基

此维基页面由我们教育项目的学生团队编写。

Blu-ray player will not turn on

The Blu-ray player will not turn on after pressing the appropriate button

Power cord is unplugged

Ensure the power cord is securely plugged into a functioning outlet.

Power cord is damaged

If the power cord is plugged in and the outlet is properly supplying power, the power cord may need to be replaced as shown here.

Blu-ray player does not start playback

There is a disc in the Blu-ray player, but the Blu-ray player is not recognizing it

Playable disc is not inserted

Ensure a playable disc is inserted. Check the disc type, color system, and regional code. If this information is unknown, try inserting another disc to determine whether the problem was the disc or the player.

Disc is not oriented correctly, or is dirty

Place the disc on the disc tray correctly inside the guide, with playback side down. Also ensure the disc is clean.

Laser lens is dirty or damaged

If a playable disc is inserted correctly and the Blu-ray player is still unable to read it, then the laser lens that reads the disc is possibly covered by dust or damaged. To access the device's disc drive, follow the steps shown here.

Disc tray will not open

The Blu-ray player will power on, but the tray will not open while on

Disc tray is being blocked from opening

Make sure that there is nothing obscuring the tray from fully opening. If there is a mechanical sound even when the tray does not open, then there may be internal blockage. To access the device's disc drive, follow the steps shown here.

Disc tray motor not working

If there is no blockage and the tray will not open, you may need to replace the motor responsible for opening and closing the tray. To access the device's disc drive, follow the steps shown here.

No video or audio output

The Blu-ray player is on and able to read the disc, but there is no image or sound

Files are not recorded in a format that the unit can play

It is possible that the player will recognize a disc and attempt to play it, but the content on the disc is in an unreadable format.

HDMI cable or Audio/Video cables not properly connected

Check to make sure that the Blu-ray player is properly connected to the TV. If your TV has an HDMI port, then ensure the HDMI cable properly connects the Blu-ray player to the TV. If not, make sure that all of the Audio/Visual jacks are plugged into the correct ports.

Damaged HDMI or Audio/Visual cables

It is possible that the cables are properly connected, but are damaged. In this case, new cables are needed to connect the Blu-ray player to the TV. To access the device's motherboard, follow the steps shown here.

Damaged output jacks

If new cables have been used and there is still no video or audio output, the jacks may be damaged and in need of replacement. To access the device's motherboard, follow the steps shown here.

Unit unresponsive

The player freezes up, or is unresponsive to any user input

Unit froze up

If the Blu-ray player has frozen up and has become unresponsive during use, unplug the power cord, wait a few seconds, and plug it back in to reset the system.

Buttons not working

If a button is stuck and will not depress, or if the unit is unresponsive to a specific button, the button may need replacement. To access the device's motherboard, follow the steps shown here.

Konrad Jurpik

于02/05/15注册

154 声望

创作了0篇指南

团队

UW Tacoma, Team 1-1, Rose Winter 2015 UW Tacoma, Team 1-1, Rose Winter 2015 的会员

UWT-ROSE-W15S1G1

4 名成员

创作了3篇指南

16条评论

None of this is helping my new Sony Blu-ray player to unfreeze....

Won't turn off, open drawer or have any remote response.

It's a Sony 3500. Any ideas? Please.

proudpaisley - 回复

I am a BP220 owner and have had the "unit suddenly becomes unresponsive" problem referred to above, ever since I have owned it. The "solution" offered above is not a fix, but a half-assed workaround. -- What if almost every time you wanted to use your computer to get on the internet, it suddenly froze up and all the manufacturer offered as a solution was to unplug it, wait a few seconds, and then plug it back in. -- Or if your car always suddenly died after driving 50 miles, all the manufacturer offered as a solution was to disconnect the battery, wait a few seconds, then reconnect it???

Since LG has admitted it is a "known issue", then there should have been a recall to either repair or replace the devices for which the problem exists.

Michael Donehoo - 回复

i agree with Mr Donehoo its a BS response to give a band-aid fix for something thats gonna happen again 5-10 mins later a recall or software update could fix it

Michael Cleary - 回复

what about unresponsive to connecting to wifi

Julie Dam - 回复

I have 2 of these doing exactly the same thing. This has been an issue for more than a year. Yes unplugging and restarting works temporarily but when are we going to get an actual fix for this? Do I have to replace both players for something that actually works as it’s supposed to?

coffeeaddictsmith - 回复

Has there been a fix or recall for this? Mine I see doing the same thing everytime I try to open Netflix!!

aewer91 - 回复

If being frustrated on your day off while your trying to watch a move that keeps freezing is your thing….. then LG is the blue ray player for you

thomas moojelski - 回复

I have sound in every language but English it says digital mode dts instead of don't sound like the other language modes

Vicky Roberts - 回复

Sorry to say I had the same problem. The LG would freeze up and nothing I did would get it to start except turn off and FF to the stopping point. I fixed it today. I picked up the cheapest Blueray I could find and got a 5 year no questions asked free replacement

rwayne1664 - 回复

The motor on my LG Blu-Ray player stopped and now unit does not recognized any discs…CHECKED IT OUT BUT MOTOR DOES NOT SPIN - WHAT A WASTE AFTER 4 YEARS OF OWNING BUT ONLY USED 7 TIMES…

germain59 - 回复

LG bdp bp250 fully dead. No power on. Nowhere got solution to me. Even LG manufacacturer

safi Alam - 回复

My player the tray can not open when I push the Open

button the display show LOC

What happen.

U Aung Thinn - 回复

I'm so !#^&@@ that my lg blue ray has no audio but it has video but if I play a regular DVDs it's fine!!! What the f…k is there problem

mark wallace - 回复

I bought this DTS HD over a year ago and have only used it a few time. Suddenly it won't receive power from either the remote or power button. What could be the problem?

Anthony Beltz - 回复

I have the LG BP120. I recently upgraded to an Onkyo AVR and a Samsung S90C TV (both 2023 models). My LG Blu-Ray player would provide video, but no audio. I updated the LG's system software and then reset the audio output to BitStream. All working perfectly now.

TelemarkTumalo - 回复

I agree LG needs to step up and make proper compensation A band-aid fix is not a solution to the problem

Taylor Black - 回复

添加评论

浏览统计数据:

过去 24 小时: 4

过去 7 天: 11

过去 30 天: 64

总计 27,751