注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的7本指南。
正翻译步骤 2
步骤 2
Apply heat
-
Prepare an iOpener (or grab a hair dryer or heat gun) and heat the face of the watch until it's slightly too hot to touch.
-
Leave the iOpener on the watch for at least a minute to fully heat the screen and soften the adhesive holding it to the case.
| - | [* black] [guide|11677|Prepare an iOpener|new_window=true], and heat the display to soften the adhesive securing it in place. |
|---|---|
| + | [title] Apply heat |
| + | [* black] [guide|11677|Prepare an iOpener] (or grab a hair dryer or heat gun) and heat the face of the watch until it's slightly too hot to touch. |
| + | [* black] Leave the iOpener on the watch for at least a minute to fully heat the screen and soften the adhesive holding it to the case. |
| + | [* icon_note] You may need to reheat the iOpener, or move it around on the screen as sections cool, to heat the screen enough to pry it off. |
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。