注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南。
正翻译步骤 9
步骤 9
Remove flat cable linking the camera's body to the back casing
-
Locate the connector which holds the flat cable to the main circuit board. Unlock the connector by gently pulling up its black piece from the side the flat cable comes into it.
-
Pull the flat cable from the connector and you'll have completely removed the back casing from the camera.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。