跳转到主内容

iPad 2 Wi-Fi EMC 2415のLCDの交換

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的28指南

英语
日语

正翻译步骤 2

步骤 2
iPad 2 Wi-Fi EMC 2415 LCD Replacement: 步骤 0 中的图像 1,2 iPad 2 Wi-Fi EMC 2415 LCD Replacement: 步骤 0 中的图像 2,2
  • The front panel ribbon cables are connected beneath the LCD. To access them, you'll need to temporarily flip the LCD over and out of the way.

  • Be very careful when moving the LCD, and do not attempt to remove it from the iPad—its display data cable will remain connected while it is rotated over.

  • Lift the LCD from its long edge closest to the volume buttons and gently flip it out of the rear case—like turning the page in a book.

  • Set the LCD face down on the front panel.

フロントパネルのリボンケーブルはLCD下に繋がっています。このケーブルにアクセスするには、一時的にLCDを裏返して作業の邪魔にならない場所に移動させます。

LCDを移す際は十分にご注意ください。iPadから取り出さないでください。ディスプレイデータケーブルが繋がった状態です。

LCDを音量ボタンに一番近い長辺側から持ち上げて、本のページをめくるように慎重にリアケースから裏返します。

LCD前面をフロントパネル上に被せます。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利