跳转到主内容

iPad Air 2 Wi-Fi 前面板拆解程序

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的18本指南

英语
中文

正翻译步骤 4

步骤 4
iPad Air 2 Wi-Fi  Opening Procedure, Anti-Clamp instructions: 步骤 0 中的图像 1,3 iPad Air 2 Wi-Fi  Opening Procedure, Anti-Clamp instructions: 步骤 0 中的图像 2,3 iPad Air 2 Wi-Fi  Opening Procedure, Anti-Clamp instructions: 步骤 0 中的图像 3,3
Anti-Clamp instructions
  • The next two steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down two steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • Elevate the iPad enough for the Anti-Clamp's arms to rest above and below the screen.

  • Pull the blue handle towards the hinge to disengage opening mode.

  • Position the suction cups near the top edge of the iPad—one on the front, and one on the back.

  • Push down on the cups to apply suction to the desired area.

  • If you find that the surface of your device is too slippery for the Anti-Clamp to hold onto, you can use packing tape to create a grippier surface.

接下来的两个步骤演示了如何使用反向钳,一个旨在简化打开过程的工具。 如果你不使用 反向钳,请跳过这两个步骤以使用替代方法。

有关如何使用 反向钳的完整说明,请查看本指南

将 iPad 抬高到足以让 反向钳的铰链位于屏幕上方和下方的位置。

将蓝色手柄拉向铰链以解除开启模式。

将吸盘放在屏幕上主页按钮的正上方——一个在前面,一个在后面。

向下推吸盘以将吸力施加到所需区域。

如果发现设备表面太光滑而反向钳无法吸住,请使用包装胶带来创造一个更容易抓握的表面。

[title] Anti-Clamp instructions
-[* icon_note] The next two steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. ***If you aren't using the Anti-Clamp, skip down two steps for an alternate method.***
+[* icon_note] The next two steps demonstrate the [product|IF145-513|Anti-Clamp], a tool we designed to make the opening procedure easier. ***If you aren't using the Anti-Clamp, skip down two steps for an alternate method.***
[* icon_note] For complete instructions on how to use the Anti-Clamp, [guide|152309|check out this guide|new_window=true].
-[* black] Elevate the iPad enough for the Anti-Clamp's hinges to rest above and below the screen.
+[* black] Elevate the iPad enough for the Anti-Clamp's arms to rest above and below the screen.
[* black] Pull the blue handle towards the hinge to disengage opening mode.
-[* black] Position the suction cups near the left edge of the screen—one on the front, and one on the back.
+[* black] Position the suction cups near the top edge of the iPad—one on the front, and one on the back.
[* black] Push down on the cups to apply suction to the desired area.
[* icon_note] If you find that the surface of your device is too slippery for the Anti-Clamp to hold onto, you can use packing tape to create a grippier surface.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利