我的工作台

快速访问设备的指南、配件和论坛

iPad Air LTE Front Panel Assembly Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南。

英语

韩语

上一步

正翻译步骤 4

步骤 4

iPad Air LTE Front Panel Assembly Replacement: 步骤 0 中的图像 1，2

iPad Air LTE Front Panel Assembly Replacement: 步骤 0 中的图像 2，2

Remove the front panel assembly.
If the home button ribbon cable sticks to the iPad's rear case, don't try to force it. Gently peel it off the case using a pair of tweezers, and then you can fully remove the front panel assembly.
If you experience "ghost" or "phantom" touch input issues with your new display, this can be resolved by adding a layer of very thin insulating tape, such as Kapton (polyimide) tape, to the highlighted areas on the back of the panel. iFixit panels come with the proper insulation, and should not require the addition of any tape.
Without the proper insulation, these areas of the digitizer can ground out against other components, causing touch input malfunction.
The insulation is not visible to the naked eye, and is different from the foam dust barrier strips found on many iPads.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。