跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 15

步骤 15
Insert a spudger under the end of the upper component board and gently slide it toward the volume rocker to free the board from adhesive. Be very careful not to bend the board too much or scrape it against the top of the rear case. Be very careful not to bend the board too much or scrape it against the top of the rear case.
  • Insert a spudger under the end of the upper component board and gently slide it toward the volume rocker to free the board from adhesive.

  • Be very careful not to bend the board too much or scrape it against the top of the rear case.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可