跳转到主内容

Sony NEX-7 上、下壳更换

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 10

步骤 10
Sony NEX-7 Top and Back Shell Replacement: 步骤 0 中的图像 1,3 Sony NEX-7 Top and Back Shell Replacement: 步骤 0 中的图像 2,3 Sony NEX-7 Top and Back Shell Replacement: 步骤 0 中的图像 3,3
  • Starting at the bottom, gently pry the back panel away from the body of the camera using your fingers.

  • Once the back panel is free from the body, rotate the camera such that back is facing you and pull the back panel past the screen by rotating it to fit around the screen.

  • The back panel will be easier to take off if the LCD screen has been extended away from the camera by about 60 degrees.

  • Set the back panel aside.

从底部开始,用手指轻轻地将背板撬离相机机身。

当背板脱离机身时,请旋转相机,使后部朝向您,然后旋转后面板直至能让屏幕通过,然后将后面板拉过屏幕。

如果将液晶显示屏从相机上拉开约60度,则背板将更容易取下。

将背板放在一旁。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利