跳转到主内容

iPad Mini Wi-Fi Logic Board Einheit tauschen

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
德语

正翻译步骤 18

步骤 18
iPad Mini Wi-Fi Logic Board Assembly Replacement: 步骤 0 中的图像 1,2 iPad Mini Wi-Fi Logic Board Assembly Replacement: 步骤 0 中的图像 2,2
  • With the tip of a spudger, peel up the larger piece of tape covering both antenna cables near the bottom of the rear case.

  • Do not try to remove this piece of tape; it is wrapped around the top antenna cable.

Ziehe das größere Stück Klebeband, welches beide Antennenkabel nahe am unteren Rand des Rückgehäuses bedeckt, mit der Spudgerspitze hoch.

Versuche nicht dieses Band zu entfernen, da es um das obere Antennenkabel gewickelt ist.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利