跳转到主内容

iPad Mini Wi-Fi Logic Board Einheit tauschen

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
德语

正翻译步骤 17

步骤 17
iPad Mini Wi-Fi Logic Board Assembly Replacement: 步骤 0 中的图像 1,2 iPad Mini Wi-Fi Logic Board Assembly Replacement: 步骤 0 中的图像 2,2
  • Use the tip of a spudger to peel back the small piece of tape covering both antenna cables on the bottom right side of the iPad.

  • Leave the lower part of the tape stuck to the back of the rear case to aid in reassembly.

Ziehe das kleine Stückchen Klebeband, welches beide Antennenkabel in der unteren rechten Seite des iPads bedeckt, mit der Spudgerspitze zurück.

Lasse den unteren Teil des Klebebands auf der Rückseite des Rückgehäuses kleben, das erleichtert den Zusammenbau.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利