注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南。
正翻译步骤 3
-
Heat an iOpener and apply it to the same edge of the phone for two minutes.
-
Apply a suction cup to the back of the phone, as close to the center of the right edge as possible (where the adhesive is narrowest).
-
Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame.
-
Insert the point of an opening pick into the gap.
-
If you are having trouble creating a gap, the adhesive isn't weakened enough. Make sure you have heated the edge until just barely too hot to touch try this step again.
-
You can try applying a few drops of high concentration (over 90%) isopropyl alcohol into the seam to help loosen the adhesive.
| [title] Insert an opening pick | |
| [* black] Heat an iOpener and apply it to the same edge of the phone for two minutes. | |
| [* black] Apply a suction cup to the back of the phone, as close to the center of the right edge as possible ([https://d3nevzfk7ii3be.cloudfront.net/igi/D5lNQoWPOgOCEAPO.full|where the adhesive is narrowest|new_window=true]). | |
| [* black] Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame. | |
| [* black] Insert the point of an opening pick into the gap. | |
| - | [* icon_note] Due to tight tolerances, |
| - | [* black] If you are having trouble creating a gap, |
| - | [* black] You can try applying a few drops of high concentration (over 90%) isopropyl alcohol into the seam to help loosen the adhesive. |
| - | [* icon_caution] Do not apply excessive force with the pick, or you will risk cracking the back cover glass. |
| + | [* icon_note] Due to tight tolerances and strong adhesive, multiple attempts may be necessary to create a gap for the opening pick. |
| + | [* black] If you are having trouble creating a gap, the adhesive isn't weakened enough. Make sure you have heated the edge until just barely too hot to touch try this step again. |
| + | [* black] You can try applying a few drops of high concentration (over 90%) isopropyl alcohol into the seam to help loosen the adhesive. |
| + | [* icon_caution] Do not apply excessive force with the pick, or you will risk cracking the back cover glass. |
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。