注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南。
正翻译步骤 2
步骤 2
Create an opening gap
-
Rest the heated right edge of the phone on something that is about 0.5 inches (13 mm) thick. This angles the phone for the opening tool.
-
Brace the left edge of the phone with your fingers so that the phone won't slide. Pull on the suction cup with firm pressure.
-
Press the edge of an opening tool into the seam between the back cover and the frame.
-
With the opening tool in place in the seam, slide it back and forth along the seam to loosen the back cover.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。