跳转到主内容
英语
中文

正翻译步骤 5

步骤 5
Right, so, this is supposed to be a teardown, and unfolding it doesn't count. Time to pick a point of entry and go for it. Arm iOpeners! Experience tells us that Samsung likes to build their phones from the front, and stick the back cover on last—so we start there. Once again a little heat from our iOpener softens the glue up nicely, and we slice off the first of the two outside covers. We're in.
  • Right, so, this is supposed to be a teardown, and unfolding it doesn't count. Time to pick a point of entry and go for it. Arm iOpeners!

  • Experience tells us that Samsung likes to build their phones from the front, and stick the back cover on last—so we start there.

  • Once again a little heat from our iOpener softens the glue up nicely, and we slice off the first of the two outside covers. We're in.

  • Samsung's usual curved glass covers, like the one we recently pulled off the Note 10+, can be stressful to pry under, so the flat point of entry here is a welcome relief.

是的,这是一份拆解教程,单纯的展开它不能算是拆解,是时候找准切入点拆解它了。上!iOpener!

经验告诉我们,三星喜欢从屏幕面板开始组装,最终以粘合背板作为结尾,所以我们把背板作为了切入点。

再一次的,只用iOpener稍微加热一点点便可以软化粘合剂,其中一块背板便能取下,让我们往内部拆解。

三星通常使用的曲面玻璃背板, 就像我们最近拆解的 Note 10+那样,边缘拆解十分困难,所以这个平坦的拆入点更受我们欢迎。

在开源创作共享许可协议下,你的投稿已被许可