菜单

你的设置

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的153指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 19

步骤 19
Continue releasing the adhesive along the top edge of the iPad, and slide the opening pick around the top left corner. If the adhesive is warm enough, remove the iOpener from the iPad for convenience. However, if the adhesive is still quite sticky, re-heat the iOpener and lay it on the left edge while you work.

  • Continue releasing the adhesive along the top edge of the iPad, and slide the opening pick around the top left corner.

  • If the adhesive is warm enough, remove the iOpener from the iPad for convenience. However, if the adhesive is still quite sticky, re-heat the iOpener and lay it on the left edge while you work.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下，你的投稿已被许可。