菜单

你的设置

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的153指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 9

Step 9
It may be necessary to move the heated iOpener back onto the right edge of the iPad as you release the adhesive. This depends on how long the iPad has been able to cool while you were working on it. If the opening pick gets stuck in the adhesive, "roll" the pick along the side of the iPad, continuing to release the adhesive. If the opening pick gets stuck in the adhesive, "roll" the pick along the side of the iPad, continuing to release the adhesive.

  • It may be necessary to move the heated iOpener back onto the right edge of the iPad as you release the adhesive. This depends on how long the iPad has been able to cool while you were working on it.

  • If the opening pick gets stuck in the adhesive, "roll" the pick along the side of the iPad, continuing to release the adhesive.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下，你的投稿已被许可。