翻译步骤＃8 - Removing iPad 3 4G Front Panel - iFixit

取消

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的153指南。

英语

中文

上一步下一步

正翻译步骤 8

步骤 8

While the bottom edge is being heated by the iOpener, begin releasing the adhesive from the right edge of the iPad.

Slide the opening pick down along the edge of the iPad, releasing the adhesive as you go.

The adhesive is very strong, and some serious force may be required. Work carefully.

While the bottom edge is being heated by the iOpener, begin releasing the adhesive from the right edge of the iPad.
Slide the opening pick down along the edge of the iPad, releasing the adhesive as you go.
The adhesive is very strong, and some serious force may be required. Work carefully.
If you can see the tip of the opening pick underneath the front glass, pull the pick out just a little bit. While using the opening pick this deep won't damage anything, it may get adhesive residue all over the LCD.

在开源创作共享许可协议下，你的投稿已被许可。