跳转到主内容

MacBook Pro 13" Unibody 早期 2011 电池更换

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 3

步骤 3
MacBook Pro 13" Unibody Early 2011 Battery Replacement: 步骤 0 中的图像 1,1
  • Use the attached plastic pull tab to remove the battery from the upper case.

  • If you're installing a new battery, you should calibrate it after installation:

  • Charge it to 100%, and then keep charging it for at least 2 more hours. Next, unplug and use it normally to drain the battery. When you see the low battery warning, save your work, and keep your laptop on until it goes to sleep due to low battery. Wait at least 5 hours, then charge your laptop uninterrupted to 100%.

  • If you notice any unusual behavior or problems after installing your new battery, you may need to reset your MacBook's SMC.

使用电池顶部的塑料拉手拉出电池。

如果你在安装新电池,你应该在安装完成后进行校准

把电池充满,然后至少继续充电两个小时。之后,像往常一样使用它,消耗电量。当你看到低电量警告时,保存好你的工作,然后让笔记本开着,直到它因为低电量而入睡。再等待至少五个小时,之后再把你的笔记本充满到100%

如果在安装新电池后你发现了一些异常状况或麻烦,你可能需要重置你的Macbook的设备管理器

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利