-
Use a spudger or a clean fingernail to flip up the locking flap on the ZIF connector. This is the unlocked position.
-
Be careful when releasing the safety latch because it is fragile and may break easily.
-
Use tweezers or your fingers to gently pull the cable out of its socket.
-
If the cable has a pull tab, use it to grip the cable. You may damage the cable by gripping it directly.
-
To reconnect, make sure the locking flap is flipped up and gently reinsert the cable. Then, flip the locking flap down to secure the cable. The cable should slide into the socket with little to no force. If you're having trouble, remove it, check that the flap is fully unlocked, and try again.
-
It is now safe to completely remove the back cover from the camera.
您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)的著作权利。
指南步骤编辑键盘快捷键:
Ctrl + Shift + N
在下面插入新的一行
Ctrl + Shift + P
在上面插入新的一行
查看所有快捷键