Replacement delivery tray flap
The delivery tray flap on my HP OfficeJet 8600 Pro is broken. I would like to replace it.
385889
声誉积分: 25
1
1
3个答案
最有帮助的答案
声誉积分: 101.9千
8
180
359
@hpcharlie ,Charles, You can use the links below to esquire about your printers replacement part. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.
这个答案有帮助吗？
得分
1
How do I get the old Output Paper Catch Tray Assembly out?
I have a HP Officejet Pro 8600 plus printer in my office at work. The paper tray that has a section on the front of it to stop the paper from sliding off when it is printing is broken. How do I fix that? I have looked at places for a part replacement but have not been able to find one. Please contact me to give instructions what I should do. With appreciation. Carrie
这个答案有帮助吗？
得分
0
@carriemccreight I know this is an old thread but I've published a model to MakerWorld that you can print with a 3D printer. Obviously if you don't have access to one there are tons of companies that will print the model on your bahalf. Hope it helps.
https://makerworld.com/en/models/1308242...
这个答案有帮助吗？
得分
0
1条评论
The company I work for has a HP Officejet Pro 8600 Plus printer in my office. The paper tray that stops the paper from falling after being printed is broken. How do I get a replacement for that?
由 Carrie McCreight 完成的