Stratford, Ontario, Canada
Working on vehicle's from about age 13 was alway's a great interest. Started sweeping the floors and kept looking over the local mechanics and body mens shoulder's to learn what I could.
Worked in the automotive industry heat exchanger division 20+, Most of the time as a quality Assurance Tech. which entailed any thing from repairing/calibrating delicate measuring instruments, teaching employee's in the use of equipment/machines, trouble shooting equipment/machinery. Because of the way shifts worked out it allowed me to hone other interest also, working on vehicles, doing renovations on homes from plumbing, electrical, heating to complete gutting and with a friend doing appliance repair. When the Factory moved to Mexico was forced to pursue other interest. Completed courses to get my certificate to do Home/Building inspection's and ran a small renovation business successfully for a few years. Then completed apprenticeship/college certification for Licensed Collision Tech./Mechanic. In spare time started working on windows based computer's trouble shooting hardware problems and fixing and then giving them to people that could use them. Now I find my self semi retired with a bit of time on my hands and volunteer here at iFixit trying to help others with there repair issues
问题解答论坛
-
回复： Can my pc startup without PRAM?Jorre Verheyen, In many trouble shooting forums I often see the saying to reset the Pram etc. to get the computer to boot up, so I would assume Pram must work and connector will have to be repaired/replaced if possible. See links below to learn about PRAM (Parameter Random Access Memory) Good luck. I hope this helped you out, if so let me know by pressing the helpful button. http://www.guidingtech.com/30498/what-is-pram-smc-mac-reset/ http://techterms.com/definition/pram
-
回复： Replacement battery doesn't last as long as original@fkmattern, floyd, Not positive, perhaps after a few charge/discharge cycles the battery may perform better. When you say battery draining faster than normal you must remember to consider all the Apps,etc. that may be running or running in the back ground. Have all your information ready, and contact Ifixit parts with your concern if you feel the battery is not functioning satisfactorily. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. http://help.ifixit.com/category/133-contact-ifixit
-
回复： I have no low beams,skipkuchta, Recheck bulb sockets/wires/plugs/etc. for corrosion, clean if needed, reseat bulbs and try. Check all ground wiring in vicinity of lighting circuit, check for damage, clean connections and retighten. all looks good and still no go, possibly a bad headlight switch. Check the link below to possibly solve your low beam issue. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. http://www.justanswer.com/saturn/2yg84-96-saturn-sc-low-beam-headlight-left-side-does-not-light.html
-
回复： Where are the Spark Plugs?@covfefe,Kay, Some engines may have a plastic cover over top of engine that needs to be removed to access the spark plugs. Link below show spark plugs being replaced on 2.0 Mitsubishi Lancer engine. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. https://www.youtube.com/watch?v=hKe5cYSS...
-
回复： Idle issue need help UPDATE@tanker151, Travis, Have the car scanned for trouble codes as a first step, could have an error even if engine light not on. Some of the auto parts suppliers offer free code reading like Pepboys, Nappa, Advanced auto parts,etc and some of the guys are very knowledgeable and may have seen the issue often and put you on the right track. Could be low coolant, air in the cooling system(bleed system), faulty temp. sensor, vacuum leaks(spray some aerosol starter fluid around base of intake/ throttle body, vacuum lines/etc.), if engine rev's even out or change noticeably there is the leak. Recheck a dirty/sticking IAC., is new TPS calibrated(link 1 below). Check the 2nd link for more trouble shooting tips. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. https://www.youtube.com/watch?v=GL8snGK_... https://www.youtube.com/watch?v=L788jKEV...
-
回复： Rebuilding a DC40 gearbox@lamurphy2, Larry, Not familiar with this gear box, did a search DC40 gearbox and posted what I found that may help, if not just leave your question open for other ifixit volunteer's to see and may have a solution. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. https://www.tractorsupply.com/static/sit... http://www.powellequipmentparts.com/omni-gearbox-parts_opt.pdf https://www.google.ca/search?q=rotary+cu...-HUAhUn4IMKHejKBzgQ_AUIBigB&biw=1024&bih=... https://www.youtube.com/watch?v=4HhAJTdl...
-
回复： How do I stop the fan making a strange repeating noise?Linsey Dyer, I realize you are worried about down time, but the computer is new and you should have repaired under warranty ASAP before something possibly heats up because of failing fan and causes bigger issue. You can perhaps use the link below for warranty, see if repair location near by and they can give you a turn around time or you can express your need of the computer and need express repair done. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. https://www.asus.com/us/Laptops/ASUS-ZenBook-UX330UA/HelpDesk_Warranty/
-
回复： How to install a belt assembly.frankiemcbride36, The 1st link is a manual for Craftsman ZTS 7500, will show belt installation/instruction,if not your model#, use the 2nd link and scroll down to find your model. 3rd and 4th links are video instruction. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. https://www.manualslib.com/manual/496328...-Zts-7500.html?page=31#manual https://www.manualslib.com/products/Craf...-Zts-7500-2844723.html https://www.youtube.com/watch?v=U_4HJdFh... https://www.youtube.com/watch?v=XXgySCKT...
-
回复： What would cause all of the power windows to not work.@firehouse66, John, You should perhaps replace the Power Windows/ Sunroof (Circuit Breaker) as it may be faulty, see pic. below for location. Still no go, replacement master control assembly still could be faulty or not plugged securely, recheck connections/test switch. Still no go, time to remove the door panel and test the power and ground to the window motor. No power to motor there could be a break in the wire harness between door jamb and door frame(quite common), peel back wrapping/harness sleeve and inspect for pinched/broken wires. All looks good there, then remove driver side kick panel as I believe there is a pwr. window harness plug there that may be corroded and in need of a good cleaning. If you do have power to the motor, then the window motor is faulty, I know what you are thinking all pwr. window motors faulty(it could happen), but unusual, do check for power at motor plug and clean if corroded and retry before replacing pwr/w motor. Links below may help in trouble shooting/testing/door panel ...
-
回复： Trouble shoot 2003 Toyota A/C@jakedog, Jim, Possible it could be a blend air door issue inside the HVAC unit that is stuck in the heat position and is preventing air from flowing through the A/C evaporator. Links below may help in diagnosing your AC's issue. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. http://densoautoparts.com/sites/default/...-tips/DENSO%20AC%20troubleshooting%20tips... http://www.aa1car.com/library/ac98.htm http://www.aa1car.com/library/ac_no_cool... http://blog.firestonecompleteautocare.co...-air-conditioning-repair-troubleshooting/ https://www.youtube.com/watch?v=wtRZ5xTa...
@
@
@
@
@
一段时间内的信誉积分
信誉积分分解
| 活动 | 计算 | Delta |
|---|---|---|
| 帖子被投票赞成 | 5397 | 49568 |
| 答案被采纳 | 1518 | 37068 |
| 巡查维基编辑接受 | 4 | 4 |
| 对一个帖子投反对票 | 3 | -6 |
| 帖子被投票否决 | 4 | -24 |
| 从管理员处获得的免费信誉积分 | 1 | -852 |
徽章
1709997
最近的通知
标记所有为已读
Show:
全部
全部
未读
你任务都完成了！没有新的通知。
-
carmengauci评论了你对“Display says New CID: 30”的回答
-
paola ritacca评论了你对“My brake lights won't go off, please help me.”的回答
-
Michael minor评论了你对“Tablet won't turn on”的回答
-
Donna Ross评论了你对“Setting up Voicemail on my ZTE cell phone”的回答
-
Sue de Nym评论了你对“Whats the best way to clean and maintain the USB-C port?”的回答
-
David Echols评论了你对“cannot reset my tablet to factory default”的回答
-
David Echols评论了你对“cannot reset my tablet to factory default”的回答
-
bandorachi bandorachi评论了你对“Blank screen with only the standby light on. Not on at all.”的回答
-
Doung Vong评论了你对“2000 honda accord tail and dash lights not working.”的回答
-
Cyndi评论了你对“I have a picture and no sound”的回答
-
ellenhamilton@hotmail.co.uk评论了你对“My printer is in Pause”的回答
-
Dawn Davis评论了你对“Tablet won't turn on”的回答
-
你被授予好答案徽章！
-
Duke & Karen Clayton评论了你对“Why is my Keuirg not heating water.”的回答
-
你被授予好答案徽章！
-
melvinmoss87评论了你对“Kenmore model 21252110 auto load sensing”的回答
-
你被授予好答案徽章！
-
guty69评论了你对“Samsung Gear Live not turning on”的回答
-
Micah Simmler评论了你对“Whats the best way to clean and maintain the USB-C port?”的回答
-
Ronald Lawson评论了你对“How to reset the password”的回答
-
Wendi Melgoza评论了你对“Changing the plastic that attaches to the blade”的回答
-
你被授予好答案徽章！
-
Michael Graham评论了你对“How to reset security system”的回答
-
你被授予好答案徽章！
-
Baylee Johnston评论了你对“How do I reset my tablet when I don't remember the password”的回答
-
Issac Yawiapui评论了你对“Fuel system flow problem. Engine will not start and run”的回答
-
Chris Gerber评论了你对“Game boy not turning on”的回答
-
savage_queen 95评论了你对“Tablet won't turn on”的回答
-
C Taylor评论了你对“How do I clear or fix an E4 error code”的回答
-
Angie Merewether评论了你对“How to reset the password”的回答
-
Kishan Mali评论了你对“Volume key broken and not working.”的回答
-
Katherine Smyth评论了你对“Why won't the brush rotate?”的回答
-
Katherine Smyth评论了你对“Why won't the brush rotate?”的回答
-
raelowery评论了你对“cannot reset my tablet to factory default”的回答
-
Dr Margaret Turnbull评论了你对“The ZTE turned off and wont turn back on”的回答
-
Bobbie Sechrist评论了你对“Starter relay location under dash”的回答
-
Henry jon评论了你对“I forgot my password”的回答
-
Henry jon评论了你对“I forgot my password”的回答
-
Mel Royce Estorque评论了你对“in my acer after installing windows 10 my touchpad is not working?”的回答
-
Henry jon评论了你对“I forgot my password”的回答
-
I Have A Good Name :)评论了你对“Tablet won't turn on”的回答
-
diane评论了你对“Can you extract broken headphone in port?”的回答
-
Henry jon评论了你对“I forgot my password”的回答
-
tommita63评论了你对“Why is my phone not ringing”的回答
-
Sandra McDonald评论了你对“How do I remove a charge port”的回答
-
jeff.coutu评论了你对“Whats the best way to clean and maintain the USB-C port?”的回答
-
Tonya Brown评论了你对“Tablet won't turn on”的回答
-
therichmondphoneguy评论了你对“My Samsung smart tv keeps turning on and off”的回答
-
Yvonne C Samson评论了你对“The ZTE turned off and wont turn back on”的回答
-
你被授予很好的答案徽章！
- 查看更多...