声誉积分: 740
13
4
2
So i just bought an logitech Driving force Shifter, and want to make a standalone version, cause i dont have the wheel for it, and i figured they use SUBD9 Connector, well only one, and i hoped to get some help from anyone, that could help me make this happen to become a usb connector?
i have an arduino i could use to convert the SUBD to the usb through arduino
i watched this guy here but still yet i didnt get much out of it..
声誉积分: 48.3千
7
66
97
You are correct. Logitech says that the shifter connector is a DB-9 Male.
So maybe this will work?
这个答案有帮助吗？
Nothing but a new usb controller will work , the shifter is only a axis with the mechanism, nothing else , no board, no chips, you need a Arduino to map the axis coordinates into buttons in order to work
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 1
过去 30 天： 5
总计 3,281
4条评论
I doubt you could do that.
由 George A. 完成的
well @pccheese haha lets hope i eventually will come up with something :) :P
由 Petter Berget 完成的
Good luck! You'll need it. Not only will you have to adapt the connector, but you will have change the firmware to accept this new interface.
由 George A. 完成的
http://www.leobodnar.com/shop/index.php?...
由 Adrian Morrin 完成的