跳转到主内容

1.86GHz or 2.13GHz Processor, 128GB or 256GB Flash Storage

147 个问题 查看全部
问题已关闭

Water Damage Repair + Diagnosis

So, last week, I dumped a ton of water on my laptop and within seconds it shutoff. Now it's dry and doesn't boot/power on at all and it doesn't get power from an AC adapter (the light on the magsafe adapter doesn't light up).

I'm trying to take apart and repair this computer for fun. I opened up the back and thought I saw some damage, it would be great if someone else could take a look.

Block Image

(Picture 1) Back-side of the motherboard: Does that white stuff look like corrosion?

Block Image

(Picture 2) Magsafe/i-o board: Does it look burnt/damaged? And if I replaced just that could I be maybe able to get the AC power working?

Thanks!

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

Robert Graeber, image one definitely shows corrosion. Clean it with a distilled water/baking soda mix and a soft brush. Then rinse the whole board with Distilled water followed by 90%+ isopropyl alcohol. Image 2 is a bit hard to determine, it does look like it took "a hit" turn it over and check the components. Yes, it is possible that a replacement will fix it. Keep on mind that the two components showing corrosion, are N-Power Mos Fet's and are part of the "PBus Supply & Battery Charger" circuit, so all of this could be very well interconnected. Hope this helps, good luck.

这个答案有帮助吗?

得分 3

1条评论:

添加一条评论
浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 11

总计 904