该用户尚未填写个人资料。
问题
Has anyone found a way to removing/buff out these spots off iPhone rear glass? It is not scratches or marks for sure. It...
阅读更多So i am replacing the digitiser for a customer, but while testing i noticed that touch id couldn’t be activated. so i was...
阅读更多iPad Air 2 wont turn on or charge, there is absolutely no signs of life. i measured it via lightning caple to input...
阅读更多Two of my customers this week were complaints that their iPhone X screen went black after they had their displays...
阅读更多Hello, i have a customer who needs the digitiser and lcd replaced on an ipad air 2 wifi. i noticed upon receiving the...
阅读更多问题解答论坛
It most likely needs a screen replacement, i have had many xs’s fully black out after drop, even without a single crack in the front glass. this happens on both original and aftermarket screens and i think it is because of the oled panel. it rare cases, it requires a board level repair, but odds are good that it will be fixed with a new screen.
阅读更多i have a similar issue, two of my customers complained that their screens went black after i replaced their displays. the phone works perfectly, but it shows no picture. i always use best quality grade a+ displays and i have never encountered this issue before none of the phones were on ios 13 though
阅读更多are you 100% sure the battery is the correct model? that might be what’s wrong. otherwise, check if any of the metal pins on the fpc connector is damaged. make sure to align the cable above the connector perfectly. it may take some time, as it can be really tricky
阅读更多If you press the back of the phone against your ear, do you hear a hissing noice? similar to the one you are experiencing while recording? that might be the issue. many smartphones emit a weak hissing noice from within, but is is significant on some models. otherwise, do a test recording with a new front camera flex plugged in. many smartphone repair shops will test this for you for free.
阅读更多The digitiser is most likely broken. is the glass or lcd craked? was it dropped? if so, you probably need to replace the digitiser
阅读更多