Phone battery to usb
Can anyone tell me how to adapt this to male usb, or micro usb.
任何超过20信誉积分的人都能够标记有问题的评论和帖子。
显示详情
信誉积分: 1
信誉积分: 784.1千
发帖于:
Luke Miller you'll have to give us more information about what you are trying to do. Can you just adapt a male usb, or micro usb to it does not tell us much. If you are trying to externally charge the battery then you will need a flat ribbon connector that fits your battery since you cannot solder to the ribbon cable. Unless of course you are very skilled in soldering very small wires and have the right tools. Also, if you solder anything to the battery you can no longer use it in the device that it is from. If you have an existing charger for the device than you can build something fairly simple on a prototype board. You would need the flat ribbon connector, female USB port etc. This goes for charging as well as using it as a power supply. So let us know what you are planning on doing.
糟糕!我想改变我的主意。
第 1页,共 1 页