注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南。
正翻译步骤 2
步骤 2
-
When the back panel is heated, apply the suction cup close to a corner of the phone. Lift up and insert a halberd spudger or opening pick under the rear glass.
-
Slide the blade of the Halberd spudger along the edge of the phone to separate the adhesive.
-
Follow around the edge of the phone, and use an opening pick or other tool (such as a plastic card) to keep already opened portions from re-adhering.
| [* black] When the back panel is heated, apply the suction cup close to a corner of the phone. Lift up and insert a halberd spudger or opening pick under the rear glass. | |
| [* black] Slide the blade of the Halberd spudger along the edge of the phone to separate the adhesive. | |
| - | [* black] Follow around the edge of the phone, and use an opening pick or other tool (such as a plastic card) to keep already opened portions from re-adhering. |
| + | [* black] Follow around the edge of the phone, and use an opening pick or other tool (such as a [product|IF145-101|plastic card]) to keep already opened portions from re-adhering. |
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。