注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南。
正翻译步骤 13
步骤 13
-
To separate the adhesive securing the final two, middle battery cells, apply a few more drops of liquid adhesive remover (or your iOpener) to each cell.
-
It may help to elevate one side of your MacBook Pro a few inches so that the adhesive remover flows in the correct direction, underneath the battery cells. You can use a sturdy book or foam block to prop up one side of your MacBook Pro while you work.
-
Insert the card about an inch between the left-center battery cell and the upper case, separating the adhesive between the cell and the case.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。