英语
中文

MacBook Pro(13英寸,带有Retina显示屏,2013末)电池更换

指南信息

= 已完成 = 未完成
    Use this guide to remove the glued-in battery from your MacBook Pro. This is best done with the help of an iFixit battery replacement kit; the liquid adhesive remover in your kit will dissolve the adhesive securing the battery, allowing you to remove it with ease. Alternatively, you can use an iOpener to apply a modest amount of heat in order to soften the adhesive before prying out the battery. [ … ] '''iFixit adhesive remover is highly flammable.''' Perform this procedure in a well-ventilated area. Do not smoke or work near an open flame during this procedure. [ … ] accidentally punctured. punctured. If your battery is swollen, [https://www.ifixit.com/Wiki/What_to_do_with_a_swollen_battery|take extra precautions|new_window=true]. [ … ] '''Note''': The solvent used to dissolve the battery adhesive can damage certain plastics, such as the MacBook Pro's plastic speaker enclosures. Take care when applying the solvent. [ … ] sold), [https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Retina+Display+Late+2013+Battery+Replacement/110109|click [guide|110109|click here for a slightly modified set of instructions].
    Use this guide to remove the glued-in battery from your MacBook Pro. This is best done with the help of an iFixit battery replacement kit; the liquid adhesive remover in your kit will dissolve the adhesive securing the battery, allowing you to remove it with ease. Alternatively, you can use an iOpener to apply a modest amount of heat in order to soften the adhesive before prying out the battery. [ … ] '''iFixit adhesive remover is highly flammable.''' Perform this procedure in a well-ventilated area. Do not smoke or work near an open flame during this procedure. [ … ] accidentally punctured. punctured. If your battery is swollen, [https://www.ifixit.com/Wiki/What_to_do_with_a_swollen_battery|take extra precautions|new_window=true]. [ … ] '''Note''': The solvent used to dissolve the battery adhesive can damage certain plastics, such as the MacBook Pro's plastic speaker enclosures. Take care when applying the solvent. [ … ] sold), [https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Retina+Display+Late+2013+Battery+Replacement/110109|click [guide|110109|click here for a slightly modified set of instructions].

      描述一下你正在修理的device的特别配件或组件。例如:电池

      创建一个标题。

      这个简短的一两句总结将会出现在搜索结果中。

      在读者深入阅读这份指南之前做好背景信息交流。

      说明(指南)步骤

      第 1 步

      拆下用于固定电池的上部五个3.7 mm T5 Torx螺丝。

      第 2 步

      在 iFixit 电池更换套装中的液体除胶剂会影响MacBook Pro 屏幕的放反射涂层。

      第 3 步

      如果您有一个带有液体去胶剂的iFixit电池组合,那么是时候准备好了

      第 4 步

      拔出粘合剂清除剂的黑色橡胶塞。

      第 5 步

      在最右边的电池单元的边缘均匀涂抹数滴去除剂。

      第 6 步

      如果没有胶水去除剂,用热的iOpener来加热和软化将电池固定到上壳上的一部分粘合剂,然后再仔细撬动。

      第 7 步

      在最右侧的电池和上盖之间插进一张塑料卡,将两者之间的粘合剂一分为二。

      第 8 步

      使用塑料卡从后面撬起最右侧的电池。

      第 9 步

      与相邻的电池重复此过程:

      第 10 步

      暂时将您的塑料卡放在两个最右侧的电池单元的下面,以防止它们重新粘到上壳上。

      第 11 步

      重复上述步骤将两个最左侧的电池单元与上壳分开。

      第 12 步

      将第二张卡留在两个左侧电池格之间的角落。

      第 13 步

      为了分离固定最后两个中间电池单元的粘合剂,将另外少许液体粘合剂去除剂(或你的iOpener)应用于每个电池。

      第 14 步

      将卡拉出并将其插入右中心电池和上壳之间约一英寸,将电池和外壳之间的粘合剂分开。

      第 15 步

      在两个中心上撬起以分离最后一点粘合剂并将电池从设备中提起。

      第 16 步

      移出电池。

      在开源创作共享许可协议下,你的投稿已被许可