跳转到主内容
英语
中文

正翻译步骤 8

步骤 8
Using a soldering iron, remove the solder bridge between the jumper pads. Using flux and desoldering braid remove the solder from the negative tab of the battery. Solder bridge from jumper cleaned
  • Using a soldering iron, remove the solder bridge between the jumper pads.

  • Using flux and desoldering braid remove the solder from the negative tab of the battery.

  • Solder bridge from jumper cleaned

  • Negative battery tab unsoldered from PCB

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可