跳转到主内容
英语
中文

正翻译步骤 7

步骤 7
There are three places that will have to be desoldered. Positive battery contact Negative battery contact
  • There are three places that will have to be desoldered.

  • Positive battery contact

  • Negative battery contact

  • and a jumper

  • For the jumper the only thing required is to remove the solder between the pads.

  • Apply some flux to the jumper. The pliers will help to stabilize the PCB during soldering. any other means to hold it steady can be used.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可