跳转到主内容

iMac Intel 21.5" Retina 4K Displayeinheit trennen

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的27指南

英语
德语

正翻译步骤 3

步骤 3
iMac Intel 21.5" Retina 4K Display Assembly Replacement: 步骤 0 中的图像 1,3 iMac Intel 21.5" Retina 4K Display Assembly Replacement: 步骤 0 中的图像 2,3 iMac Intel 21.5" Retina 4K Display Assembly Replacement: 步骤 0 中的图像 3,3
  • Lift the display up from the frame and remove it from the iMac.

  • It may be necessary to slowly lift from one side to peel against the remaining adhesive.

  • Be very careful handling the display—it's big, heavy, and made of glass.

  • After the adhesive is cut, it cannot be used to re-seal the display in place. Follow this guide to replace the adhesive strips that secure the display to the rear enclosure.

Hebe das Display aus dem Rahmen und entferne es vom iMac.

Es ist vielleicht notwendig, es erst langsam an einer Seite hochzuheben, um es aus der Klebeverbindung zu lösen.

Sei sehr vorsichtig beim Hantieren des Displays - es ist groß, schwer und aus Glas.

Nachdem der Klebestreifen durchgeschnitten ist, kann er nicht mehr verwendet werden. Folge dieser Anleitung, um die Klebestreifen, die das Display befestigen, wieder anzubringen..

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利