修复你的物品 社区 商店

iMac Intel 21.5" Retina 4K Displayeinheit trennen

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的27指南。

返回指南
英语
德语
上一步 下一步

正翻译步骤 2

步骤 2
iMac Intel 21.5" Retina 4K Display Assembly Replacement: 步骤 0 中的图像 1，3 iMac Intel 21.5" Retina 4K Display Assembly Replacement: 步骤 0 中的图像 2，3 iMac Intel 21.5" Retina 4K Display Assembly Replacement: 步骤 0 中的图像 3，3

  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).

  • Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.

  • Repeat this step with the other adhesive strip and remove it.

  • If either adhesive strip breaks before it's removed, use a plastic card to slice through the remaining adhesive.

Trenne, wenn nötig, die letzten Reste der Verklebung am unteren Rand mit einer Plastikkarte auf.

-[* icon_note] If necessary, a plastic card can be used to cut any remaining sections of the bottom adhesive strip.
+[* icon_caution] Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).
+[* black] Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.
+[* black] Repeat this step with the other adhesive strip and remove it.
+[* icon_note] If either adhesive strip breaks before it's removed, use a [product|IF145-101|plastic card] to slice through the remaining adhesive.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。