注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的14指南。
正翻译步骤 11
步骤 11
Remove the logic board screws
-
Remove the following 8 screws:
-
Five 2.3 mm Phillips #00 screws with partial threads securing the logic board to the rear case.
-
Two 2.3 mm Phillips #00 screws with full threads securing the logic board and camera.
-
One 2.9 mm Phillips #00 screw from beneath the "Do not remove" sticker.
-
Note for re-assembly:
-
The screw that goes next to the camera (bottom right orange highlighted screw) also has a metal strip that holds the camera in place.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。