跳转到主内容

Samsung Galaxy S6 Vervanging van de midframemodule

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的13指南

英语
荷兰语

正翻译步骤 2

步骤 2
Samsung Galaxy S6 Midframe Assembly Replacement: 步骤 0 中的图像 1,3 Samsung Galaxy S6 Midframe Assembly Replacement: 步骤 0 中的图像 2,3 Samsung Galaxy S6 Midframe Assembly Replacement: 步骤 0 中的图像 3,3
  • Before you perform this step, make sure you've ejected the SIM card tray.

  • Firmly grasp the edge of the midframe assembly.

  • Lift up on the midframe assembly while pushing down on the battery to separate the midframe assembly from the rest of the phone.

  • While lifting the midframe, be careful to avoid snagging it on the audio jack or charging port.

  • Once the midframe is partially seperated, carefully run an opening pick around the edges of the rest of the phone to separate the top of the midframe.

  • Be careful not to accidentally insert the opening pick between the glass and display.

  • To avoid damage to the headphone jack, remove the top of the midframe first, then push the midframe downwards to disengage it from the headphone jack.

  • You may need to heat and apply an iOpener to the edges of the display to soften the display adhesive if midframe separation is difficult.

Zorg dat je de simkaarthouder, voordat je met deze stap begint, uit je toestel hebt verwijderd.

Pak een zijkant van de midframemodule stevig vast.

Til een kant van de midframemodule op terwijl je de batterij naar beneden duwt. Zo scheid je de midframemodule van de rest van de telefoon.

Wees, bij het optillen van het midframe, voorzichtig dat je deze niet breekt op de audiojack- of de oplaadpoort.

Als het midframe eenmaal voor een groot deel is losgekomen, schuif je je plectrum langs de zijkanten van de rest van de telefoon om de bovenkant van het midframe ook los te krijgen.

Wees voorzichtig en zorg dat je je plectrum niet per ongeluk tussen het glas en het scherm steekt.

Om te voorkomen dat je je hoofdtelefoonjack beschadigt, verwijder je eerst de bovenkant van het midframe en duw je het midframe vervolgens naar beneden om deze van de hoofdtelefoonjack los te maken.

Het kan, als het losmaken van het midframe te moeilijk blijkt, nodig en handig zijn om een iOpener te verwarmen en deze op de zijkanten van de telefoon te leggen om de lijm rondom het scherm genoeg te verzachten.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利