Skip to main content

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的12本指南

英语
中文

正翻译步骤 4

Step 4
Use flat end of a spudger to lift the LCD connector up off its socket on the logic board. Do not pry against the large IC next to the connector, or you may break it. Gently pry from the side of the connector as shown.
  • Use flat end of a spudger to lift the LCD connector up off its socket on the logic board.

  • Do not pry against the large IC next to the connector, or you may break it. Gently pry from the side of the connector as shown.

使用平头端将LCD连接器从主板上的插座上提起。

不要撬开连接器旁边的大IC,否则可能会破侧面轻轻地撬坏连接器。 从连接器的起,如图所示。

在开源创作共享许可协议下,你的投稿已被许可