跳转到主内容

iPod Nano 第2世代のケースアセンブリの交換

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
日语

正翻译步骤 4

步骤 4
iPod Nano 2nd Generation Case Assembly Replacement: 步骤 0 中的图像 1,1
  • Remove the following two screws:

  • One #00 Phillips screw with a large head near the headphone jack.

  • One #000 Phillips screw with a smaller head near the side of the iPod. This screw strips easily, so be sure to press down firmly on the screwdriver.

次の2本のネジを外します。

ヘッドホンジャック付近の#00大型ヘッドのプラスネジ1本

iPodの側面付近の#00小型ヘッドネジ1本。このネジは簡単に潰れてしまうので、ドライバーでしっかり押し込みながら回してください。

[* black] Remove the following two screws:
[* red] One #00 Phillips screw with a large head near the headphone jack.
- [* orange] One #00 Phillips screw with a smaller head near the side of the iPod. This screw strips easily, so be sure to press down firmly on the screwdriver.
+ [* orange] One #000 Phillips screw with a smaller head near the side of the iPod. This screw strips easily, so be sure to press down firmly on the screwdriver.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利