正翻译步骤 3
步骤 3
-
Disassemble the new headphone jack.
-
Measure the inside length of the new headphone jack.
-
Add half an inch to the length you measured, and mark the new length on the old headphone wire.
-
Clamp the wire strippers around the wire where the mark is. Press tight enough to cut through the insulation but not the wire. Pull (Strip) the insulation from the mark to the cut end.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。