跳转到主内容

iPad Mini 3 Wi-Fi LCDシールドプレート交換

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的48指南

英语
日语

正翻译步骤 8

步骤 8
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 步骤 0 中的图像 1,3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 步骤 0 中的图像 2,3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 步骤 0 中的图像 3,3
  • Take the first pick you inserted and slide it up toward the top corner of the iPad.

  • If you can see the tip of the opening pick through the front glass, don't panic—just pull the pick out a little bit. Most likely, everything will be fine, but try to avoid this as it may deposit adhesive on the front of the LCD that is difficult to clean off.

1番最初に差し込んだピックを、iPadの上部端に向かってスライドして動かします。

フロントガラス越しにピックの先端が見えても焦らないでください。この場合、ピックを少しだけ外側へ戻して下さい。問題ない場合がほとんどですが、奥まで差し込みすぎないように注意してください。液晶ディスプレイ上に接着剤が付いてしまった場合、取り除くのが難しくなります。。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利