跳转到主内容

iPad Mini 3 Wi-Fi LCD Shield Plate austauschen

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的48指南

英语
德语

正翻译步骤 6

步骤 6
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 步骤 0 中的图像 1,3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 步骤 0 中的图像 2,3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 步骤 0 中的图像 3,3
  • Place a second opening pick alongside the first and slide the pick down along the edge of the iPad, releasing the adhesive as you go.

  • Throughout the rest of the procedure, if you encounter significant resistance to sliding picks beneath the glass, stop and reheat the section you're working on. Forcing the picks risks cracking the glass.

Platziere ein zweites Plektrum neben dem Ersten und ziehe ihn vorsichtig bis zur Ecke des iPad. Dabei löst du den Kleber.

Wenn du während der Prozedur auf starken Widerstand triffst die Plektren zwischen dem Glas zu bewegen, dann stoppe und erhitze den Bereich erneut, an dem du arbeitest. Die Plektren mit Gewalt zu verschieben führt ggf. zu einem Glasbruch.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利