跳转到主内容

Sostituire lo schermo di un iMac Intel EMC 2805 da 21.5"

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的12指南

英语
意大利语

正翻译步骤 2

步骤 2
iMac Intel 21.5" EMC 2805 Display Replacement: 步骤 0 中的图像 1,3 iMac Intel 21.5" EMC 2805 Display Replacement: 步骤 0 中的图像 2,3 iMac Intel 21.5" EMC 2805 Display Replacement: 步骤 0 中的图像 3,3
  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).

  • Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.

  • Repeat this step with the other adhesive strip and remove it.

  • If either adhesive strip breaks before it's removed, use a plastic card to slice through the remaining adhesive.

Stai molto attento a non toccare i contatti dei condensatori o qualsiasi altra saldatura esposta sul retro dell'alimentatore (evidenziato in rosso).

Prendi l'aletta all'estremità di una delle due strisce adesive inferiori dello schermo e tirala verso la parte superiore dell'iMac per rimuoverla.

Ripeti questo passaggio con l'altra striscia e rimuovila.

Se una delle due strisce si rompe prima che venga rimossa, usa una scheda di plastica per tagliare l'adesivo rimasto.

[* icon_caution] Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).
[* black] Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.
[* black] Repeat this step with the other adhesive strip and remove it.
-[* icon_note] If either adhesive strip breaks before it's removed, use a plastic card to slice through the remaining adhesive.
+[* icon_note] If either adhesive strip breaks before it's removed, use a [product|IF145-101|plastic card] to slice through the remaining adhesive.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利