跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的11指南

英语
西班牙语

正翻译步骤 9

步骤 9
Insert a fingernail or the flat end of a spudger in the groove in the speaker housing, near the corner of the rear case. Pull the speaker down, away from the corner of the case. Pull the speaker down, away from the corner of the case.
  • Insert a fingernail or the flat end of a spudger in the groove in the speaker housing, near the corner of the rear case.

  • Pull the speaker down, away from the corner of the case.

Inserta una uña o el extremo plano de un spudger en la ranura de la carcasa del altavoz, cerca de la esquina de la carcasa trasera.

Tira del altavoz hacia abajo, lejos de la esquina de la carcasa.

在开源创作共享许可协议下,你的投稿已被许可