跳转到主内容

iPad Air Wi-Fiモデル ロジックボードの交換

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

正翻译步骤 16

英语
日语
步骤 16
iPad Air Wi-Fi Logic Board Replacement: 步骤 0 中的图像 1,3 iPad Air Wi-Fi Logic Board Replacement: 步骤 0 中的图像 2,3 iPad Air Wi-Fi Logic Board Replacement: 步骤 0 中的图像 3,3
  • Use the flat end of a spudger to disconnect the headphone jack connector from the logic board.

  • Pry up only on the connector—not on the socket itself.

  • Newer iPad units have a loop of tape connecting this connector to its socket on the the logic board. This tape must be cut in order to disconnect the headphone jack.

  • Fold the headphone jack cable out of the way.

スパッジャーの平面側先端を使って、ヘッドフォンジャックのコネクターをロジックボードから外します。

コネクターのみ接触してください。ソケット自体には触らないでください。

新しいiPadユニットには、このコネクタをロジックボード上のソケットに接続するためのテープのループが付いています。 ヘッドフォンジャックを外すには、このテープを切断しなければなりません。

ヘッドフォンジャックケーブルを邪魔にならない位置で折り曲げます。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利