跳转到主内容

iPad Air Wi-Fi LCDの交換

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的28指南

英语
日语

正翻译步骤 4

步骤 4
iPad Air Wi-Fi LCD Replacement: 步骤 0 中的图像 1,3 iPad Air Wi-Fi LCD Replacement: 步骤 0 中的图像 2,3 iPad Air Wi-Fi LCD Replacement: 步骤 0 中的图像 3,3
  • Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.

  • To reduce the risk of a short, you can insert a battery blocker or a modified opening pick to disconnect the battery.

  • Be very careful when you isolate the battery using a battery blocker. The battery contacts are easily damaged, resulting in irreversible damage.

  • Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.

  • If you are having trouble fitting the battery blocker underneath the logic board, you can try using a playing card to disconnect the battery.

ロジックボードにバッテリーコネクターを留めている2.3 mm プラスネジを1本外します。

ショートのリスクを減らすために、バッテリーブロッカーまたは改造した開口ピックを挿入してバッテリーの接続を外せます。

バッテリーブロッカーを使って、バッテリーを絶縁する際は、作業にご注意ください。バッテリーコンタクトは簡単に破損してしまい、取り返しのできないダメージをもたらすことがあります。

ロジックボードのバッテリーコネクターの下にバッテリーブロッカーを差し込み、作業中、この状態のままにしておきます。

ロジックボードの下にバッテリーブロッカーをはめ込むのが難しい場合は、トランプを使って バッテリーを外してみることもできます。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利