跳转到主内容

Remplacement du panneau frontal de l'iPad Air WiFi

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的76指南

英语
法语

正翻译步骤 23

步骤 23
iPad Air Wi-Fi Front Panel Replacement: 步骤 0 中的图像 1,3 iPad Air Wi-Fi Front Panel Replacement: 步骤 0 中的图像 2,3 iPad Air Wi-Fi Front Panel Replacement: 步骤 0 中的图像 3,3
  • Slide the lower left pick to the lower left corner to cut the adhesive on that corner.

  • Leave the pick at the corner. Do not pry any farther, and do not remove the pick from the iPad.

  • The third image shows the two antennas and the home button cavity in the lower case of the iPad.

  • The following steps will direct you where to pry to avoid damage to these components. Only apply heat and pry where directed.

Déplacez le médiator situé en bas, à gauche, vers le coin de l'iPad, pour détacher l'adhésif.

Laissez le médiator en place, sur le coin. N'allez pas plus loin et ne le retirez pas.

Vous pouvez voir, sur la troisième photo, la cavité du bouton home et les deux antennes, situées dans la partie inférieure de l'iPad.

Les prochaines étapes donneront les directives précises afin d'éviter d'endommager les composants. Ne chauffez et faites levier qu'aux endroits expressément indiqués.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利