注：你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南。
正翻译步骤 1
步骤 1
-
Use the edge of a plastic opening tool to:
-
Pry the side button connector up off the logic board from underneath the wires.
-
Pry the speaker connector up off its socket on the logic board from beneath the speaker wires.
-
Carefully flip up the ZIF ribbon cable retaining flap on the socket near the headphone jack.
-
Pull the headphone jack ribbon cable toward the left side of the iPad to disconnect it from its socket.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。