我的工作台

快速访问设备的指南、配件和论坛

Nintendo Switch OLED Model Game Card Reader Daughterboard Replacement

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的10本指南。

英语

中文

上一步

正翻译步骤 3

步骤 3

Nintendo Switch OLED Model Game Card Reader Daughterboard Replacement, Remove the daughterboard: 步骤 0 中的图像 1，3

Nintendo Switch OLED Model Game Card Reader Daughterboard Replacement, Remove the daughterboard: 步骤 0 中的图像 2，3

Nintendo Switch OLED Model Game Card Reader Daughterboard Replacement, Remove the daughterboard: 步骤 0 中的图像 3，3

Remove the daughterboard

The bottom of the daughterboard is connected to the motherboard via a press connector.
Insert a spudger between the edge of the daughterboard and the motherboard.
Pry up with the spudger to disconnect the press connector and separate the daughterboard from the frame.
Remove the daughterboard.
To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。