跳转到主内容

任天堂 Switch Lite 后面板更换

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的15本指南

英语
中文

正翻译步骤 2

步骤 2
Nintendo Switch Lite Back Panel Replacement, Remove the top and bottom back panel screws: 步骤 0 中的图像 1,2 Nintendo Switch Lite Back Panel Replacement, Remove the top and bottom back panel screws: 步骤 0 中的图像 2,2
Remove the top and bottom back panel screws
  • Use a JIS 000 driver or an official iFixit PH 000 driver to remove the following screws securing the back panel:

  • Two 3.6 mm-long screws on the top of the device

  • Two 3.6 mm-long screws on the bottom of the device

  • To prevent these tight screws from stripping, apply firm downward force, work slowly and try a different screwdriver if the screws won't come out.

用 JIS 000 螺丝刀或官方 iFixit PH 000 螺丝刀卸下固定后面板的螺丝:

设备顶部的两个3.6毫米长的螺丝

设备底部的两个3.6毫米长的螺丝

为防止这些拧的很紧的螺丝滑丝,请向下用力,缓慢操作,如果螺钉无法卸下,请尝试使用不同的螺丝刀。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利