注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南。
正翻译步骤 5
步骤 5
-
Remove the following screws:
-
Two 2.1 mm Phillips screws securing one of two metal brackets to the rear case.
-
One 2.6 mm Phillips screw securing the logic board to the rear case.
-
Remove the metal bracket from the rear case.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。