跳转到主内容

로직 보드 분리

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
韩语

正翻译步骤 3

步骤 3
Logic Board Disconnection: 步骤 0 中的图像 1,3 Logic Board Disconnection: 步骤 0 中的图像 2,3 Logic Board Disconnection: 步骤 0 中的图像 3,3
  • If the left speaker is already disconnected, skip this step.

  • Slide the tip of a spudger underneath the left speaker cable and pry straight up to disconnect the speaker.

  • With the connector disconnected, slide the flat end of a spudger under the cable to separate the adhesive securing the cable to the logic board.

왼쪽 스피커가 이미 연결 해제된 경우 이 단계를 건너뛰세요.

왼쪽 스피커 케이블 아래로 스퍼저의 끝을 밀어 넣고 똑바로 들어 올려 스피커를 연결 해제하세요.

커넥터를 분리한 상태에서 spudger/스퍼저의 평평한 끝을 케이블 밑에서 밀어 케이블을 로직 보드에 고정하는 접착제를 분리하세요.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利