跳转到主内容

Riparazione alimentatore Philips Wake-Up HF3520

英语
意大利语

正翻译步骤 1

步骤 1
Philips Wake-Up HF3520 Power supply repair, Replace IC: 步骤 0 中的图像 1,2 Philips Wake-Up HF3520 Power supply repair, Replace IC: 步骤 0 中的图像 2,2
Replace IC
  • On the main PCB with the power jack, replace the MXT2410 switchmode regulator IC (SO-8 Package).

  • Currently a seller "adeleparts2010" has this chip available (might change in future). The previously recommended pin-compatible device from Quorvo (ACT4060ASH-T) is not a good choice and might cause more damage.

  • Warning: I just encountered a problem with the ACT4060. It blew up on one lamp and damaged the LEDs as well. So it seems not a perfect replacement after all.

Sul principale circuito stampato con il jack di alimentazione, sostituisci il regolatore della modalità di commutazione IC MXT2410 (SO-8 Package).

Attualmente il venditore "adeleparts2010" ha questo chip disponibile (potrebbe cambiare in futuro).

Il ACT4060 è pin-compatibile ma potrebbe essere una scelta problematica. Potrebbe esplodere e danneggiare i LED, quindi non usarlo.

-[title] Replace the IC chip
+[title] Replace IC
[* black] On the main PCB with the power jack, replace the MXT2410 switchmode regulator IC (SO-8 Package).
-[* black] Currently a seller "adeleparts2010" has this chip available (might change in future).
-[* icon_caution] The ACT4060 is pin-compatible but can be a problematic choice. It can blow up and damage LEDs, so don't use it.
+[* black] Currently a seller "adeleparts2010" has this chip available (might change in future). The previously recommended pin-compatible device from Quorvo (ACT4060ASH-T) is not a good choice and might cause more damage.
+[* icon_caution] Warning: I just encountered a problem with the ACT4060. It blew up on one lamp and damaged the LEDs as well. So it seems not a perfect replacement after all.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利